Would anyone be interested in a 2332cc T1
I have all the parts to build this engine some of which include
aluminium crankcase drilled and tapped for full flow
Scat 84mm crankshaft
Scat chromoly H beam connecting rods
Scat 200 forged lightened flywheel
Kennedy stage 1 clutch
Scat C95 (K8) camshaft
Melling oil pump
94mm Mahle pistons and cylinders
40x35 heads with twin springs
All this is new 12,000zl
This engine will make about 150-160HP with a set of 40 Dellortos (36venturi) or 44 Weber IDF, but the camshaft and heads can be changed for bigger at extra cost. With bigger heads and 48mm carbs this enine could produce up to about 190HP.
I have all the parts to build this engine some of which include
aluminium crankcase drilled and tapped for full flow
Scat 84mm crankshaft
Scat chromoly H beam connecting rods
Scat 200 forged lightened flywheel
Kennedy stage 1 clutch
Scat C95 (K8) camshaft
Melling oil pump
94mm Mahle pistons and cylinders
40x35 heads with twin springs
All this is new 12,000zl
This engine will make about 150-160HP with a set of 40 Dellortos (36venturi) or 44 Weber IDF, but the camshaft and heads can be changed for bigger at extra cost. With bigger heads and 48mm carbs this enine could produce up to about 190HP.