chris burns

dzięki za radę. Thanks for what exactly, my dear Garbiarniasz?

Hello everyone My name is Chris and I have recently moved from Warsaw to Sosnowiec. I have been involved with VW Beetles since I was a child, my parents bought a new 1967 Beetle 1500 and I have been around them ever…

Doesn't anyone want to have these iconic carbs? They are cheap. You will not find them cheaper anywhere else

These carbs are still for sale. 3200zl with manifolds or 3000zl without

Used heads, as above, for sale 2000zl 42*37 valves Huge ports, only suitable for a race engine Cut for 94mm cylinders

Engines with large duration camshafts will create less vacuum and so, as Mr Lysy stated, the values that the gauge shows are not important.

Sold to J

I have 6 of these wheels. Four were used on my Beetle for about 1000 kms and two were used with slicks. Price 200zl each or less if you take them all.

I suppose the heads could be changed which would lower the price and make it a better street engine. It would reduce the horsepower by about 20.

The price would need to be about 25,000zl. It has lots of very expensive parts in it eg titanium valves

I suppose it will have to be sold abroad :cry:

Would anyone be interested in buying the 2332cc engine that is currently in the Garbomaluch. It has just been serviced and checked throughout. It makes about 210hp@7000rpm. It is not an engine that you can drive every…

Ratio rockers?

Well done. The list definitely needs updating.

:D

I agree with Mr Wanel. The best option is to go for a pair of dual port heads and a pair of 36 dellortos. You could also play a bit with the heads before installing them. Some more compression and some gentle port work…

I agree with Mr Want. The best option is to go for a pair of dual port heads and a pair of 36 dellortos. You could also play a bit with the heads before installing them. Some more compression and some gentle port work…

Karol, it's a single port head.

Nie musis stosowac inny wydech. Zaslepki mas w tym zestawie

[link]

Update after last weekend? :)

If you want, you can call me tomorrow morning and we can talk about it. I had a 914 many years ago and I built a bigger engine for it. My number is (kontakt usunięty) and I am in mokotow, Warsaw so we can meet and…

It's basically the same as a 2 liter t4 with better heads. The heads are very nice.

I once worked on a Beetle that had a pair of dcnf carbs and it was great. It was 20 years ago but parts are still available for them. Better than idfs.

Bujo is a grumpy middle aged man and they are notoriously difficult to get hold of, I should know. Between work, children, alcoholism and orgies, it is difficult to find time to answer all garbus related queries.

Bigger? I have a 2600cm3?

I have some 40mm t1 valves. They are 8mm stem and the right height. You can change all 4 to 40mm or machine down 1 to 39mm.

Yes, the price is with manifolds.

These are used, but have very little use as they were on race cars. There is a choice of manifolds - t1, t4 or t1 with Superflow or Comp Eliminator heads. 3500zl or near offer. Ideal for high hp engine. [/i]

Do you have a magnesium or aluminium engine block? Most aluminium pullies are not compatible with the aluminium blocks